P1930
Fuel Additive Level Too Low/Empty - Secondary (Diesel)
Findings, check these first
- Secondary tank or chamber empty
- Transfer pump failure between chambers
- Leaking secondary chamber
- Faulty secondary level sensor
- Blocked transfer line
Standard procedure
- Check all additive chambers
- Test the transfer pump
- Inspect for leaks
- Verify secondary sensor operation
- Repair the transfer path or sensor
Code lookup
Type a code above, or start from a symptom or a common code.
Press / to jump to the box. Ford-enhanced powertrain, body, chassis and network codes. Generic P0xxx codes live on OBD Codes List.
Sources and review
Review: no source links are recorded for this entry.
Last updated 2026-09-06.
Report a correction for P1930. Include your vehicle, the issue and a source if you have one.
Related Fuel/Air Metering codes
- P1131Lack of Upstream HO2S Switch - Sensor Indicates Lean (Bank 1)
- P1151Lack of Upstream HO2S Switch - Sensor Indicates Lean (Bank 2)
- P1233Fuel Pump Driver Module Off-Line
- P1289Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range
- P1299Cylinder Head Over-Temperature Protection Active
- P1100Mass Air Flow Sensor Intermittent