P1927
Fuel Additive Level Too Low/Empty (Diesel)
Findings, check these first
- Additive tank run dry
- Leaking additive tank or lines
- Excessive dosing from a stuck injector
- Faulty level sensor reading empty
- Missed service interval
Standard procedure
- Refill the additive tank
- Inspect the tank and lines for leaks
- Test dosing injector function
- Verify the sensor reads full after refill
- Replace the sensor if it still reads empty
Code lookup
Type a code above, or start from a symptom or a common code.
Press / to jump to the box. Ford-enhanced powertrain, body, chassis and network codes. Generic P0xxx codes live on OBD Codes List.
Sources and review
Review: no source links are recorded for this entry.
Last updated 2026-09-06.
Report a correction for P1927. Include your vehicle, the issue and a source if you have one.
Related Fuel/Air Metering codes
- P1131Lack of Upstream HO2S Switch - Sensor Indicates Lean (Bank 1)
- P1151Lack of Upstream HO2S Switch - Sensor Indicates Lean (Bank 2)
- P1233Fuel Pump Driver Module Off-Line
- P1289Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range
- P1299Cylinder Head Over-Temperature Protection Active
- P1100Mass Air Flow Sensor Intermittent