P1662
Injector Control Module Relay Circuit Malfunction
Findings, check these first
- Failed IDM relay
- Open relay control circuit
- Blown IDM fuse
- Corroded relay socket
- PCM driver fault
Standard procedure
- Swap the IDM relay with a known-good unit
- Check the IDM fuse
- Test relay control voltage
- Inspect the socket
- Verify IDM powers up after repair
Code lookup
Type a code above, or start from a symptom or a common code.
Press / to jump to the box. Ford-enhanced powertrain, body, chassis and network codes. Generic P0xxx codes live on OBD Codes List.
Sources and review
Review: qualified. Read the source limits below.
- OBDII.pro: P1662 Ford definition
live reference page (obdii.pro)
Supports: Ford-family meaning for P1662: IDM_EN Circuit Failure
Fetched directly. obdii.pro is a publisher independent of the engine-codes family.
Last updated 2026-09-06.
Report a correction for P1662. Include your vehicle, the issue and a source if you have one.
This fault is part of the Ford fuel and ignition codes guide. It covers the family and the order to check it.
Related Fuel/Air Metering codes
- P1131Lack of Upstream HO2S Switch - Sensor Indicates Lean (Bank 1)
- P1151Lack of Upstream HO2S Switch - Sensor Indicates Lean (Bank 2)
- P1233Fuel Pump Driver Module Off-Line
- P1289Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range
- P1299Cylinder Head Over-Temperature Protection Active
- P1100Mass Air Flow Sensor Intermittent