Fuel Injection Control Module Circuit High Voltage
Findings, check these first
- Failing FICM voltage regulator
- Charging system overvoltage
- Poor FICM ground raising the reading
- Internal FICM fault
- Wiring short to power
Standard procedure
- Verify charging voltage is not excessive
- Measure FICM output voltage directly
- Check FICM grounds
- Inspect wiring for shorts to power
- Replace the FICM if output stays high
Code lookup
Type a code above, or start from a symptom or a common code.
Press / to jump to the box. Ford-enhanced powertrain, body, chassis and network codes. Generic P0xxx codes live on OBD Codes List.
Sources and review
Review: checked against the recorded source material.
- OBDII.pro: P1379 Ford definition
live reference page (obdii.pro)
Supports: Ford-family meaning for P1379: FUEL INJECTOR CONTROL MODULE SYSTEM VOLTAGE HIGH
Fetched directly. obdii.pro is a publisher independent of the engine-codes family.
- P1379 FORD Code: Meaning, Causes, and Symptoms | OBD2 Codes
live reference page (obd2-codes.co)
Supports: Ford meaning for P1379: Fuel Injection Control Module Circuit High Voltage
Fetched directly. obd2-codes.co phrasing matches the engine-codes family, so it counts as one publisher.
Last updated 2026-09-06.
Report a correction for P1379. Include your vehicle, the issue and a source if you have one.
Related Fuel/Air Metering codes
- P1131Lack of Upstream HO2S Switch - Sensor Indicates Lean (Bank 1)
- P1151Lack of Upstream HO2S Switch - Sensor Indicates Lean (Bank 2)
- P1233Fuel Pump Driver Module Off-Line
- P1289Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range
- P1299Cylinder Head Over-Temperature Protection Active
- P1100Mass Air Flow Sensor Intermittent