P1169
Fuel Rail Sensor In-Range High Failure
Findings, check these first
- Fuel rail pressure sensor biased high
- Actual over-pressure from a stuck regulator
- Shorted sensor signal wire
- Poor sensor ground
- PCM reference fault
Standard procedure
- Confirm actual pressure with a gauge before trusting the sensor
- Check regulator operation if pressure is truly high
- Inspect sensor wiring for shorts
- Verify the ground circuit
- Replace the sensor if the gauge disagrees with it
Code lookup
Type a code above, or start from a symptom or a common code.
Press / to jump to the box. Ford-enhanced powertrain, body, chassis and network codes. Generic P0xxx codes live on OBD Codes List.
Sources and review
Review: qualified. Read the source limits below.
- OBDII.pro: P1169 Ford definition
live reference page (obdii.pro)
Supports: Ford-family meaning for P1169: Fuel Rail Sensor In-Range High Failure
Fetched directly. obdii.pro is a publisher independent of the engine-codes family.
Last updated 2026-09-05.
Report a correction for P1169. Include your vehicle, the issue and a source if you have one.
Related Fuel/Air Metering codes
- P1131Lack of Upstream HO2S Switch - Sensor Indicates Lean (Bank 1)
- P1151Lack of Upstream HO2S Switch - Sensor Indicates Lean (Bank 2)
- P1233Fuel Pump Driver Module Off-Line
- P1289Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range
- P1299Cylinder Head Over-Temperature Protection Active
- P1100Mass Air Flow Sensor Intermittent