P1140
Water In Fuel Condition (Diesel)
Findings, check these first
- Water contamination in the fuel tank
- Infrequently drained filter housing
- Fueling from a contaminated source
- Failed filter element passing water
- Faulty sensor falsely reporting water
Standard procedure
- Drain the filter housing immediately. Water kills injectors
- Replace the fuel filter
- Sample tank fuel for contamination
- Refuel from a trusted high-turnover station
- Verify the sensor reads clear after service
Code lookup
Type a code above, or start from a symptom or a common code.
Press / to jump to the box. Ford-enhanced powertrain, body, chassis and network codes. Generic P0xxx codes live on OBD Codes List.
Sources and review
Review: qualified. Read the source limits below.
- OBDII.pro: P1140 Ford definition
live reference page (obdii.pro)
Supports: Ford-family meaning for P1140: Water In Fuel Condition
Fetched directly. obdii.pro is a publisher independent of the engine-codes family.
Last updated 2026-09-20.
Report a correction for P1140. Include your vehicle, the issue and a source if you have one.
Related Fuel/Air Metering codes
- P1131Lack of Upstream HO2S Switch - Sensor Indicates Lean (Bank 1)
- P1151Lack of Upstream HO2S Switch - Sensor Indicates Lean (Bank 2)
- P1233Fuel Pump Driver Module Off-Line
- P1289Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range
- P1299Cylinder Head Over-Temperature Protection Active
- P1100Mass Air Flow Sensor Intermittent