P1705
Manual Lever Position Sensor Out of Self-Test Range
Findings, check these first
- Misadjusted manual lever position sensor
- Worn sensor contacts
- Damaged sensor wiring
- Loose shift linkage
- Self-test run in the wrong gear
Standard procedure
- Re-run the test in the specified gear
- Check linkage adjustment and bushings
- Verify sensor alignment marks
- Test sensor resistance in each detent
- Realign or replace the sensor per results
Code lookup
Type a code above, or start from a symptom or a common code.
Press / to jump to the box. Ford-enhanced powertrain, body, chassis and network codes. Generic P0xxx codes live on OBD Codes List.
Sources and review
Review: qualified. Read the source limits below.
- OBDII.pro: P1705 Ford definition
live reference page (obdii.pro)
Supports: Ford-family meaning for P1705: Not in P or N During KOEO / KOER
Fetched directly. obdii.pro is a publisher independent of the engine-codes family.
Last updated 2026-09-04.
Report a correction for P1705. Include your vehicle, the issue and a source if you have one.
Related Transmission codes
- P1709Park/Neutral Position Switch Out of Self-Test Range
- P1711Transmission Fluid Temperature Sensor Out of Self-Test Range
- P1747Electronic Pressure Control Solenoid Short Circuit
- P1754Coast Clutch Solenoid Circuit Malfunction
- P1780Transmission Control Switch Out of Self-Test Range
- P1783Transmission Over-Temperature Condition